Essential cookies keep Rooutiq working. Optional analytics requires your permission. Privacy Policy

Enterprise security, built in.

Rooutiq separates permissions from operational approval. Ask for current control evidence and deployment-specific security status.

Learn about our security
Class 7-8 Semi Truck (J1939)Paccar MX-13 · Cummins ISX15

Peterbilt Fault Codes

Fleet Repair Costs & Prevention Guide

Peterbilt 579 and 389 fault codes — Paccar MX-13 and Cummins ISX15 J1939 codes with fleet repair data.

75
Codes tracked
22
Critical severity
2.1d
Avg downtime
$189k
Combined repair pool

Peterbilt Fault Codes (75)

Sorted by severity · Click any code for full repair cost breakdown

SPN 3031 FMI 1CriticalAftertreatment (DEF/SCR)

DEF Tank Level Low — Derate Imminent

DEF tank is critically low. EPA regulations mandate 5 mph derate when DEF runs out. Affects all EPA 2010+ diesel trucks.

SPN 3251 FMI 16CriticalAftertreatment (DPF)

DPF Differential Pressure Extremely High — Plugging Likely

DPF severely clogged — active regen failed or repeatedly interrupted. Ash loading likely at maximum.

SPN 3226 FMI 18CriticalAftertreatment (SCR)

SCR NOx Efficiency Below Threshold — Derate Warning

SCR system not reducing NOx to required EPA levels. Faulty NOx sensors, damaged SCR catalyst, or DEF dosing fault.

SPN 5246 FMI 0CriticalAftertreatment (SCR)

SCR Inducement — 5 MPH Derate Active

SCR system has entered EPA-mandated inducement — truck limited to 5 mph until resolved at authorized dealer.

SPN 412 FMI 0CriticalEGR

EGR Temperature High — Possible Cooler Failure

EGR system temperature above normal. EGR cooler failure, clogged EGR valve, or restricted cooling.

SPN 102 FMI 1CriticalTurbocharger

Boost Pressure Low — Possible Turbo Failure or Air Leak

Boost pressure below expected threshold for current engine load. Worn turbocharger, boost leak, clogged air filter.

SPN 641 FMI 7CriticalTurbocharger

VGT Actuator — Mechanical Fault

Variable geometry turbocharger actuator mechanically stuck. Common on Detroit DD15, Cummins ISX15, Paccar MX-13, Volvo D13.

SPN 100 FMI 1CriticalLubrication

Engine Oil Pressure Low — Derate Active

Engine oil pressure dropped below minimum safe level. Oil pump failure, oil leak, low oil level, or bearing wear.

SPN 2659 FMI 14CriticalLubrication

Engine Oil Level Low — Protection Active

Engine oil level has dropped below minimum. Engine protection mode activated to prevent bearing damage.

SPN 1347 FMI 5CriticalFuel System (HPCR)

High Pressure Common Rail Fuel Pump — Current Below Normal

HPCR fuel pump drawing less current than expected — internal wear or early seizure.

SPN 636 FMI 2CriticalEngine

Crankshaft Position Sensor — Erratic Signal

CKP sensor signal erratic or has momentary dropouts. Unexpected stall, hard start, or no-start.

SPN 3720 FMI 0CriticalAftertreatment (DPF)

DOC Inlet Temperature Very High — Runaway Regen Warning

DOC inlet temperature at maximum safe limit — potential uncontrolled DPF regeneration. Requires immediate engine shutdown.

SPN 100 FMI 17CriticalLubrication

Engine Oil Pressure Low — High Warning

Oil pressure at high warning threshold — ECM has not yet activated full protection but derate is imminent.

SPN 94 FMI 18CriticalFuel System

Fuel Delivery Pressure Low — Level 2 Warning

Fuel supply pressure critically low — lift pump failure or severe filter restriction. Injection system starved.

SPN 1347 FMI 1CriticalFuel System (HPCR)

HPCR Fuel Pump — Internal Pressure Low

High-pressure common rail pump not building adequate pressure — internal wear or pressure limiter failure.

ISX-111CriticalEngine ECM (Cummins)

Cummins ECM Critical Internal Failure

Cummins ISX ECM has detected a critical internal fault. May require ECM replacement and Cummins dealer programming.

ISX-1679CriticalFuel System (Cummins)

Cummins High Pressure Fuel System — Injector Metering Fault

One or more fuel injectors on the ISX are delivering incorrect quantities — metering failure detected by ECM cylinder balance monitoring.

MX13-1127CriticalFuel System (PACCAR)

PACCAR MX-13 High Pressure Pump Rail Deviation

MX-13 common rail pressure deviating from target. HPCR pump output declining — truck losing fuel pressure under load.

ISX-449CriticalLubrication (Cummins)

Cummins Engine Protection Shutdown — Oil Pressure

ISX/X15 engine has executed a protection shutdown due to oil pressure below minimum safe threshold. Engine must not be restarted until cause is found.

ISX-2185CriticalEGR (Cummins)

Cummins EGR Cooler Outlet Temperature High

EGR cooler outlet temperature on ISX exceeding safe threshold — internal EGR cooler leaking coolant into exhaust.

ISX-5246CriticalAftertreatment (Cummins)

Cummins SCR Inducement — Active Countdown

ISX SCR inducement is now active — countdown to 5 mph derate has started. Must be resolved at authorized Cummins dealer.

MX13-4400CriticalAftertreatment (PACCAR)

PACCAR MX-13 SCR Catalyst NOx Efficiency Low

MX-13 SCR catalyst NOx conversion efficiency below EPA threshold. Derate sequence initiated.

P0670HighEngine (Diesel)

Glow Plug Module Control Circuit

Glow plug module has lost communication or failed. Critical for cold diesel starts below 40°F.

P0251HighFuel System (Diesel)

Injection Pump Fuel Metering Control A Malfunction

Diesel injection pump fuel metering control malfunction. Critical for rotary injection pump diesel engines.

SPN 3364 FMI 1HighAftertreatment (DEF/SCR)

DEF Quality Too Low — Diluted or Contaminated

DEF urea concentration below required 32.5% spec. Water contamination, wrong fluid, or degraded DEF.

SPN 3251 FMI 0HighAftertreatment (DPF)

DPF Differential Pressure High — Active Regen Required

DPF is overloaded with soot. Active regeneration needed. Affects all EPA 2007+ diesel trucks.

SPN 3720 FMI 16HighAftertreatment (DPF)

DOC Inlet Temperature High — Possible Uncontrolled Regen

Diesel Oxidation Catalyst inlet temperature is above normal — indicates possible uncontrolled regeneration (runaway regen).

SPN 3216 FMI 2HighAftertreatment (SCR)

NOx Sensor 1 (Upstream) — Erratic Signal

Upstream NOx sensor producing erratic or implausible readings. Common on Cummins ISX, Detroit DD15, Volvo D13 after 300k+ miles.

SPN 3226 FMI 15HighAftertreatment (SCR)

SCR NOx Efficiency Below Warning Threshold

NOx efficiency below warning (not yet derate) threshold. First warning that SCR system performance is declining.

SPN 2791 FMI 7HighEGR

EGR Valve — Mechanical Fault (Stuck/Not Responding)

EGR valve not responding to commanded position — mechanically stuck due to carbon buildup.

SPN 5298 FMI 7HighEGR (Heavy Duty)

EGR Cooler Bypass Valve Mechanical Fault

EGR cooler bypass valve not responding to commanded position on Class 8 platform. Causes thermal stress on EGR cooler core.

SPN 3563 FMI 18HighAir Intake

Intake Manifold Pressure Low — Boost Leak Suspected

Intake manifold pressure below expected for throttle/RPM. Cracked CAC boot, split boost pipe, or failed charge air cooler.

SPN 110 FMI 0HighCooling

Engine Coolant Temperature High — Level 1 Warning

Coolant temperature above normal operating range. Thermostat, water pump, clogged radiator, or low coolant.

SPN 175 FMI 0HighLubrication

Engine Oil Temperature High

Engine oil temperature exceeding normal operating range. Oil cooler failure, blocked passages, or high-load conditions.

SPN 94 FMI 1HighFuel System

Fuel Delivery Pressure Low — Filter or Lift Pump

Fuel supply pressure below spec at fuel filter or lift pump. Clogged filter, failing lift pump, or air ingestion.

SPN 1347 FMI 3HighFuel System (HPCR)

HPCR Fuel Pump — Circuit High (Voltage)

High-pressure common rail fuel pump control circuit reading above normal. Regulator valve or wiring issue.

SPN 168 FMI 1HighElectrical

Battery Voltage Low — Below 11V

Battery voltage dropped below 11V under load. Semi trucks run 12V or 24V systems with large battery banks (4–6 batteries).

SPN 3216 FMI 4HighAftertreatment (SCR)

NOx Sensor 1 (Upstream) — Voltage Below Normal

Upstream NOx sensor circuit voltage below normal — open circuit, failed sensor heater, or wiring fault.

SPN 27 FMI 7HighEGR (Heavy Duty)

EGR Valve — Stuck Open or Closed

EGR valve mechanically stuck — cannot move to commanded position due to carbon buildup or actuator failure.

SPN 412 FMI 16HighEGR

EGR Temperature High — Level 1 Warning

EGR system temperature reaching Level 1 warning threshold — early EGR cooler degradation or valve stuck open.

SPN 175 FMI 15HighLubrication

Engine Oil Temperature — High Warning

Oil temperature at high warning level — oil cooler degradation or extreme operating conditions.

SPN 157 FMI 1HighFuel System (HPCR)

Fuel Injector Metering Rail 1 Pressure Low

Rail 1 pressure below spec — injector return leak, HPCR pump output low, or rail pressure sensor fault.

SPN 1078 FMI 1HighFuel System / Turbo

Turbocharger Fuel Actuator Pressure Low

Turbocharger fuel-based actuator not receiving adequate pressure. Affects VGT response on fuel-actuated systems.

SPN 636 FMI 8HighEngine

Crankshaft Position Sensor — Abnormal Pulse Width

CKP sensor generating pulse widths outside expected range — tone wheel damage or sensor gap issue.

SPN 641 FMI 3HighTurbocharger

VGT Actuator — Circuit High (Shorted to Voltage)

VGT actuator control circuit shorted to voltage — ECM cannot control VGT position. Boost management lost.

SPN 1389 FMI 7HighAir Intake (Heavy Duty)

Diesel Throttle Valve — Mechanical Fault

Diesel throttle valve (intake restriction valve) mechanically stuck. Affects engine shutoff and EGR balancing.

SPN 3563 FMI 0HighAir Intake (Heavy Duty)

Intake Manifold Pressure High — Overboost Warning

Intake manifold pressure above maximum — overboost condition. VGT stuck closed or boost control fault.

SPN 105 FMI 0HighAir Intake (Heavy Duty)

Intake Manifold Temperature High

Intake manifold (charge air) temperature above normal — charge air cooler restriction, fan issue, or high load. ECM may derate to protect the engine.

ISX-559HighFuel System (Cummins)

Cummins Fuel Injector Calibration Code Not Programmed

One or more fuel injectors have been replaced without programming the injector trim code (IQA code) into the ECM.

ISX-2555HighAftertreatment (Cummins)

Cummins SCR Inducement Counter — Warning Level

ISX SCR inducement counter approaching derate threshold. Cumulative NOx efficiency failures will trigger 5 mph derate within hours.

ISX-131HighEngine ECM (Cummins)

Cummins ECM Memory Fault — Calibration Data Corrupt

ISX ECM calibration memory has become corrupted. Engine may run poorly or with incorrect injection maps.

ISX-1111HighFuel System (Cummins)

Cummins Injector Cylinder 1 — Contribution Fault

ISX cylinder 1 injector contributing outside acceptable limits — over-fueling or under-fueling on cylinder 1.

ISX-1112HighFuel System (Cummins)

Cummins Injector Cylinder 2 — Contribution Fault

ISX cylinder 2 injector contribution fault. Same failure mode as ISX-1111 on cylinder 2.

ISX-3867HighAftertreatment (Cummins)

Cummins X15 Doser Valve Performance — DEF

X15 DEF dosing valve performance below spec — DEF not being injected at correct rate into SCR catalyst.

MX13-2781HighEGR (PACCAR)

PACCAR MX-13 EGR Valve Position Fault

MX-13 EGR valve position sensor or actuator fault. EGR system cannot maintain precise recirculation control.

MX13-3362HighAftertreatment (PACCAR)

PACCAR MX-13 DEF Dosing Module Fault

MX-13 DEF dosing module has detected a fault — dosing accuracy or circuit fault.

MX13-1892HighLubrication (PACCAR)

PACCAR MX-13 Oil Cooler Bypass — Fault

MX-13 oil cooler bypass valve mechanically stuck — oil not being cooled properly under high load.

EATON-6HighTransmission (Eaton)

Eaton Fuller Advantage — Autoshift Transmission Fault

Eaton Fuller Advantage automated manual transmission has detected a fault requiring diagnosis with ServiceRanger software.

EATON-14HighTransmission (Eaton)

Eaton Fuller Advantage — Clutch Actuator Performance Fault

Eaton Fuller automated clutch actuator not achieving commanded position within spec time. Clutch actuator motor wear or clutch plate wear.

EATON-25HighTransmission (Eaton)

Eaton Fuller Advantage — Gear Engagement Fault

Eaton Fuller gear engagement actuator cannot engage or disengage a specific gear range. Rail or fork wear.

P0404MediumEmissions

Exhaust Gas Recirculation Circuit Range/Performance

EGR valve stuck or out of range. Common in high-mileage diesel and gasoline engines.

P2453MediumAftertreatment (Diesel)

Diesel Particulate Filter Pressure Sensor A Circuit Range/Performance

DPF differential pressure sensor giving erratic or out-of-range readings. ECM cannot accurately monitor DPF loading.

P0405MediumEmissions

Exhaust Gas Recirculation Sensor A Circuit Low

EGR position sensor circuit voltage below minimum — sensor failed or circuit open/grounded.

P0406MediumEmissions

Exhaust Gas Recirculation Sensor A Circuit High

EGR position sensor circuit shorted high — voltage above maximum. EGR operation compromised.

P0473MediumExhaust

Exhaust Pressure Sensor High Input

Exhaust backpressure sensor reading above expected range — diesel engines with variable exhaust backpressure valves.

SPN 27 FMI 2MediumEGR (Heavy Duty)

EGR Valve Position Sensor — Erratic Signal

EGR valve position sensor producing erratic readings on Class 8 engine. ECM cannot verify actual EGR valve position.

SPN 3563 FMI 2MediumAir Intake (Heavy Duty)

Intake Manifold Pressure Sensor — Erratic Signal

Intake manifold pressure sensor erratic — ECM cannot accurately monitor boost for fuel and VGT control.

SPN 1569 FMI 31MediumEngine ECM

Engine Derate — Maintenance Interval Overdue

ECM triggered derate because a required maintenance interval has been exceeded — oil, filter, or service.

SPN 524 FMI 7MediumEngine Braking

Retarder — Mechanical Fault (Jake Brake)

Engine compression brake (Jake brake) not functioning properly. Valve adjustment or actuation issue.

SPN 2791 FMI 2MediumEGR

EGR Valve Position Sensor — Erratic (Mechanical)

EGR valve position sensor erratic signal from carbon fouling affecting sensor movement.

SPN 1569 FMI 1MediumEngine ECM

Engine Derate — Oil Service Overdue

Engine oil change interval exceeded — ECM applying fuel restriction as maintenance reminder.

SPN 524 FMI 2MediumEngine Braking

Retarder — Erratic Response (Jake Brake)

Engine brake engaging and disengaging erratically — control solenoid or valve adjustment issue.

SPN 1836 FMI 3MediumAir Brakes

Air Compressor Governor Circuit High

Electronic air governor control circuit shorted high — ECM cannot regulate compressor cut-in/cut-out pressure.

MX13-3842MediumEngine Braking (PACCAR)

PACCAR MX-13 Exhaust Brake Actuator — Mechanical Fault

MX-13 VEB (variable exhaust brake) actuator not responding to commanded position. Exhaust braking reduced.

SPN 108 FMI 2LowEngine

Barometric Pressure Sensor — Erratic Signal

Barometric pressure sensor giving implausible readings. ECM uses baro data for altitude fuel/boost compensation.

Peterbilt Fleet Fault Code Overview

Peterbilt vehicles equipped with Paccar MX-13, Cummins ISX15, Paccar MX-11 engines generate J1939 SPN/FMI fault codes that vary in severity from routine maintenance reminders to engine-threatening conditions.

For Class 7-8 semi fleets running Peterbilt vehicles, the most critical codes involve aftertreatment system failures (SCR/DPF), turbocharger issues, and engine protection derates. These codes can result in costly roadside breakdowns if not caught early.

Rooutiq can use supported telematics and maintenance evidence from Peterbilt fleet vehicles as inputs to a governed Fleet Situation, keeping source, timing, ownership, authority, and downstream repair state visible together.

Fault Codes by Vehicle Make